S.I. No. 284 of 2016 · Part 2 · Rules on public contracts
Regulation 42. Technical specifications
Chapter 3 — Conduct of the procedure · Preparation
(1) The technical specifications shall be specified in the procurement documents and shall lay down the required characteristics of works, services or supplies.
(2) The required characteristics referred to in paragraph (1) may also refer to—
(a) the specific process or method of production or provision of the requested works, supplies or services, or
(b) a specific process for another stage of its life cycle, even where such factors do not form part of their material substance where they are linked to the subject matter of the contract and proportionate to its value and its objectives.
(3) The technical specifications may specify whether the transfer of intellectual property rights will be required.
(4) For all procurement which is intended for use by natural persons, whether the general public or staff of the contracting authority, the technical specifications shall, except in duly justified cases, be drawn up so as to take into account accessibility criteria for persons with disabilities or design for all users.
(5) Where mandatory accessibility requirements are adopted by a legal act of the European Union, technical specifications shall, as far as accessibility criteria for persons with disabilities or design for all users are concerned, be defined by reference thereto.
(6) Technical specifications shall afford equal access of economic operators to the procurement procedure and shall not have the effect of creating unjustified obstacles to the opening up of public procurement to competition.
(7) Without prejudice to mandatory national technical rules in the State, to the extent that they are compatible with European Union law, the technical specifications shall be formulated in one of the following ways:
(a) in terms of performance or functional requirements, including environmental characteristics, where the parameters are sufficiently precise to allow tenderers to determine the subject matter of the contract and to allow a contracting authority to award the contract;
(b) by reference to technical specifications in the following order of preference:
(i) firstly, national standards transposing European standards;
(ii) secondly, European Technical Assessments;
(iii) thirdly, common technical specifications;
(iv) fourthly, international standards;
(v) fifthly, other technical reference systems established by the European standardisation bodies;
(vi) when none of the technical specifications referred to in clauses (i) to (v) exist, national standards, national technical approvals or national technical specifications relating to the design, calculation and execution of the works and use of the supplies,
and each reference shall be accompanied by the words ‘or equivalent’;
(c) in terms of performance or functional requirements referred to in subparagraph (a), with reference to the technical specifications referred to in subparagraph (b) as a means of presuming conformity with such performance or functional requirements;
(d) by reference to the technical specifications referred to in subparagraph (b) for certain characteristics, and by reference to the performance or functional requirements referred to in subparagraph (a) for other characteristics.
(8) Unless justified by the subject matter of the contract, technical specifications shall not, subject to paragraph (9), refer to—
(a) a specific make or source,
(b) a particular process which characterises the products or services provided by a specific economic operator,
(c) trade marks,
(d) patents,
(e) types, or
(f) a specific origin or production,
with the effect of favouring or eliminating certain undertakings or certain products.
(9) The references referred to in paragraph (8) shall be permitted, on an exceptional basis, where a sufficiently precise and intelligible description of the subject matter of the contract in accordance with paragraph (7) is not possible, in which case the reference shall be accompanied by the words ‘or equivalent’.
(10) Where a contracting authority uses the option of referring to the technical specifications referred to in paragraph (7)(b), it shall not reject a tender on the grounds that the works, supplies or services tendered for do not comply with the technical specifications to which it has referred, once the tenderer proves in its tender, by any appropriate means, including the means of proof referred to in Regulation 44, that the solutions proposed satisfy in an equivalent manner the requirements defined by the technical specifications.
(11) Where a contracting authority uses the option referred to in paragraph (7)(a) to formulate technical specifications in terms of performance or functional requirements, it shall not reject a tender for works, supplies or services which comply with a national standard transposing a European standard, a European technical approval, a common technical specification, an international standard or a technical reference system where those specifications address the performance or functional requirements which it has specified.
(12) In a tender, the tenderer concerned shall prove by any appropriate means, including those referred to in Regulation 44, that the works, supply or service in compliance with the standard meets the performance or functional requirements of the contracting authority.
On this site
Want your tender documents checked before publication? We will show you how Procurelex Check does it.
Request a demoGeneral information on the Public Authority Contracts Regulations 2016 in force. Not legal advice.